Steel bar hardening and tempering system operation rules

Steel bar hardening and tempering system operation rules

Steel bar hardening and tempering system manufacturer will give you some operation rules about steel bar hardening and tempering system.Please read careful and observe for your safety.

1.The operators can work after they accept technical training and qualified.

2.The operators must wear and use labor protective clothes before working.

3.Check and confirm the furnace shell wire connection is good and cooling water pipes have leakage phenomenon or not.

4.If you find abnormal phenomenon about the use of the furnace cooling water,you should deal with it in time.

5.Starting the system should be conducted as per the correct procedure.If you find abnormal phenomenon,you should deal with it in time.

6.Not allowed to enter the furnace and near the transformer while starting the system.

7.The operation must be more than two people. In the work, you can not open the door of the furnace box.

8.When you finishing working,you should cut off the power supply.

This article is written by Forever Furnace induction heating equipment manufacturer.If you are interested in our steel bar hardening and tempering system,please check http://www.foreverfurnace.com/products/steel-bar-hardening-and-tempering-system.html