Practical KGPS Induction Heating Furnace, Key Points of Knowledge
The supplier of induction heating furnace, quenching heat treatment equipment and quenching and tempering production line of Forever company can customize suitable induction heating furnace for you according to your technological requirements, such as steel rod heating furnace, steel tube heating equipment, billet heating furnace, screw steel tempering equipment, steel bar heat treatment equipment, pumping rod tempering equipment, etc. Up to now, Forever products have been exported to more than 20 countries. And the region is deeply trusted by users. Next, we will explain the key points of knowledge about Forever KGPS induction heating furnace.
The main points of KGPS knowledge of the forever induction heating furnace are as follows:
(1) Rated input of induction heating furnace: three-phase alternating current, frequency 50 Hz (60 Hz), line voltage 380 V (high voltage equipment 660 V, 750 V, 950 V, 1050 V, 1250 V, 1450 V, etc.)
(2) Rated output of induction heat treatment furnace: Under rated voltage or rated load, the output power can be adjusted smoothly and continuously, and its regulation range is 5%-100% of rated power;
(3) It can prevent overvoltage during switching operation;
(4) When the output voltage exceeds 1.1-1.2 times of the maximum output voltage or exceeds the voltage setting value, the overvoltage protection system operates to stop the device automatically and to send out an alarm signal, that is, to light the overvoltage indicator lamp of the instrument box;
(5) When the inverter bridge is directly connected to a short circuit, the protection system acts immediately to stop the device automatically and send out an overcurrent indication signal, which is to light the overcurrent indicator lamp of the instrument box.
(6) When the output current of induction heating equipment exceeds the setting value, the protection system also automatically stops the device and sends out an overcurrent indication signal, which is to light the overcurrent indicator lamp of the instrument box.
(7) When the working pressure of water cooling system is lower than a certain value, the induction heating equipment, quenching heat treatment equipment and quenching heat treatment production line can automatically shut down and light the water pressure indicator lamp on the panel.
(8) The induction heating furnace is equipped with current and voltage limiting links, so that the input current and output voltage are limited within the set value.
If you have any questions about our induction heating furnace, welcome to send us email.
Overseas manager: Tom Wang
Email:tom@foreverfurnace.com
Phone: 0086-13303078975(whatsapp, wechat,line)
Specialist of bar heat treatment furnace in China; Glad to be your business partner in induction heating field.
Post time: 01-05-2019